Follow these easy steps to get your AEG FAVORIT 64080 IL Dishwasher up and running in no time.
Ensure your AEG FAVORIT 64080 IL Dishwasher is free from any transport damage before installation. If the dishwasher is damaged, contact your supplier immediately.
Remove all packaging material from inside and outside the dishwasher before proceeding with the setup.
Place the dishwasher under a kitchen counter or work surface, ensuring it is close to a water tap and drain for easy connection.
Adjust the feet of the dishwasher to ensure it is level. This is crucial for the correct closure and sealing of the door. Adjust the feet until the door closes without catching on either side.
Ensure that electrical and water connections are made according to the installation instructions. Any required electrical or plumbing work should be carried out by a qualified professional.
Set the water softener according to the hardness of your local water supply. Pour 1 litre of water into the salt container, then fill it with dishwasher salt.
Fill the rinse aid dispenser to ensure your dishes dry properly and come out spotless.
Connect the water inlet hose to a water tap and the outlet hose to a drain. Make sure the hoses are not kinked or squashed.
Open the water tap to allow water to flow into the dishwasher.
Plug the dishwasher into an appropriate electrical outlet and press the On/Off button. The indicator lights will illuminate, indicating the dishwasher is ready for use.
Select a suitable wash programme by pressing the respective programme button. The digital display will show the running time of the selected programme. After a few seconds, the programme will start automatically.